Symmetricom SSU-2000 User Manual page 97

SSU_2000->users add
Username: DAVID1
Password: *******
Confirm:
Access:
2006-02-22T16:49:55
SSU_2000+>
7. Type
users
a list similar to the following:
2006-02-23T22:01:45
Password Aging: Enable
User Lockout:
User Name
-------------------- ----- ---- -------- -------- ----
ADMIN
DAVID
DAVID1
SSU_2000->
Using TL1 Commands
1. Connect a computer to port 2000 on the SSU-2000 and log in using an
Administrator-level user name and password, as described in
SSU-2000, on page 102.
2. Type
SET-USER:::123::ADD,FRANK1,ABC123!,1;
with a password of
SSU_2000 06-02-21 20:07:21
M
"\"PASSWORD CONFIRMATION REQUIRED, SET-PWD-CONFIRM\""
;
3. Type
SET-PWD-CONFIRM:::123::ABC123!;
must issue the SET-PWD-CONFIRM command immediately after the SET-USER
command in order to validate the SET-USER command. The system responds
with:
A
TL1B\""
;
4. Type
RTRV-USER:::123;
responds with:
12713020-002-2 Revision F.01 – January 2007
*******
1
and press Enter to display the user table. The system responds with
Enable
at the User level. The system responds with:
ABC123!
123 COMPLD
SSU_2000 06-02-21 20:21:41
000001 REPT EVT
"S1A02:NA,193,NSA,06-02-21,20-21-41:\"Add User, FRANK1,
to display a list of users in the system. The system
Chapter 3 Provisioning and Operating the SSU-2000
1A02 Rep Add User, DAVID1, TELA
ID: SSU2000, Name: SSU_2000
Level User Password DaysLeft Lock
4 ENA ALIVE
4 ENA ALIVE
1 ENA ALIVE
to add a user named
to confirm the new password. You
Adding Users to the System
23 NO
28 NO
29 NO
Logging In to the
FRANK1
SSU-2000 User's Guide 97