Output Adapter Panels; Balun Output Adapter Panel; De9 Output Adapter Panel - Symmetricom SSU-2000 User Manual

Chapter 8 Output Module Reference Data

Output Adapter Panels

Output Adapter Panels

Balun Output Adapter Panel

Symmetricom offers four Balun Output Adapter panels for use with 2048 kHz and
E1 Output modules. One adapter panel is required for each Output module in the
shelf. You need one Output cable (see
of available cables) to connect the Adapter panel to the shelf.
The Balun Output Adapter panel (part number 22013068-001-0) uses BNC
connectors.
The Balun Output I/O Adapter panel (part number 22013068-002-0) uses
Siemens 1.6/5.6 mm connectors.
The Balun Output I/O Adapter panel (part number 22013068-003-0) uses
Siemens 1.0/2.3 mm connectors.
The Balun Output I/O Adapter panel (part number 22013316-000-2) uses BT43
connectors.
Figure 8-36. Balun Output I/O Adapter Panel for Output Module

DE9 Output Adapter Panel

The DE9 Output Adapter panel (part number 22013067-001-0) for the DS1 and E1
Output module is shown in
output signals generated by one Output module. You need one Output cable (see
Adapter Accessories, on page 267, for a list of available cables) to connect the
Adapter panel to the shelf.
Figure 8-37. Output I/O Adapter Panel, DE9 Outputs
266 SSU-2000 User's Guide
Figure 8-36 shows an I/O Adapter with Balun outputs.
Figure 8-37. One Adapter panel accommodates the 20
Adapter Accessories, on page 267, for a list
12713020-002-2 Revision F.01 – January 2007