Sdu Interface (J8) And Backup Clock (J9) Connectors; Sdu Interface (J17 And J15) And Backup Clock (J16) Connectors; Ssu Interface (J8) Expansion Terminator - Symmetricom SSU-2000 User Manual

Chapter 2 Installing the SSU-2000
Connecting an SDU-2000 Expansion Shelf
Figure 2-8.

SDU Interface (J8) and Backup Clock (J9) Connectors

Figure 2-9.

SDU Interface (J17 and J15) and Backup Clock (J16) Connectors

If you are not installing an SDU-2000 Expansion shelf, you must install the
Expansion Terminator on J8 on the rear panel.
Expansion Terminator.
Figure 2-10. SSU Interface (J8) Expansion Terminator
Install the SDU-2000 Expansion shelf using the procedure described in
Mounting the
using the procedure described in
64.
76 SSU-2000 User's Guide
SSU-2000, on page 62. Then install power and ground connections
Making Ground and Power
Figure 2-10 shows the SSU-2000
Connections, on page
12713020-002-2 Revision F.01 – January 2007
Rack