Displaying And Maintaining Mce; Resetting Bgp Connections - HP 3600 v2 series Configuration Manual

To do...
Enter system view
Enter BGP view
Enter BGP-VPN instance view
Configure the PE as the eBGP
peer
Redistribute the VPN routes of
the VPN site
Configure a filtering policy to
filter the routes to be
advertised
Configure a filtering policy to
filter the received routes
NOTE:
BGP runs within a VPN in the same way as it runs within a public network. For more information about
Layer 3—IP Routing Configuration Guide
BGP, see

Displaying and maintaining MCE

Resetting BGP connections

When BGP configuration changes, you can use the soft reset function or reset BGP connections to make
new configurations take effect. Soft reset requires that BGP peers have route refreshment capability
(supporting Route-Refresh messages).
To do...
Soft reset the BGP connections in a
specified VPN instance
Reset BGP connections of a VPN
instance
Use the command...
system-view
bgp as-number
ipv4-family vpn-instance vpn-instance-name
peer { group-name | ip-address }
[ as-number as-number ]
import-route protocol [ process-id |
all-processes ] [ med med-value |
route-policy route-policy-name ] *
filter-policy { acl-number | ip-prefix
ip-prefix-name } export [ direct | isis
process-id | ospf process-id | rip process-id
| static ]
filter-policy { acl-number | ip-prefix
ip-prefix-name } import
.
Use the command...
refresh bgp vpn-instance
vpn-instance-name { ip-address |
all | external | group
group-name } { export | import }
reset bgp vpn-instance
vpn-instance-name { as-number |
ip-address | all | external | group
group-name }
408
Remarks
—
—
Required
Required
Required
By default, No route
redistribution is configured.
Optional
By default, BGP does not filter
the routes to be advertised.
Optional
By default, BGP does not filter
the received routes.
Remarks
Available in user view
Available in user view