HP 3600 v2 series Configuration Manual page 58

[SwitchS-rip-1] quit
# Configure Switch D.
<SwitchD> system-view
[SwitchD] bfd echo-source-ip 4.4.4.4
[SwitchD] ip ip-prefix abc index 10 permit 1.1.1.1 32
[SwitchD] route-policy frr permit node 10
[SwitchD-route-policy] if-match ip-prefix abc
[SwitchD-route-policy]
backup-nexthop 24.24.24.2
[SwitchD-route-policy] quit
[SwitchD] rip 1
[SwitchD-rip-1] fast-reroute route-policy frr
[SwitchD-rip-1] quit
Verify the configuration.
3.
# Display route 4.4.4.4/32 on Switch S and you can view the backup next hop information.
[SwitchS] display ip routing-table 4.4.4.4 verbose
Routing Table : Public
Summary Count : 1
Destination: 4.4.4.4/32
Protocol: RIP
Preference: 100
IpPrecedence:
NextHop: 13.13.13.2
BkNextHop: 12.12.12.2
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Active Adv
Tag: 0
# Display route 1.1.1.1/32 on Switch D. You can find the backup next hop information.
[SwitchD] display ip routing-table 1.1.1.1 verbose
Routing Table : Public
Summary Count : 1
Destination: 1.1.1.1/32
Protocol: RIP
Preference: 100
IpPrecedence:
NextHop: 13.13.13.1
BkNextHop: 24.24.24.2
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Active Adv
Tag: 0
apply fast-reroute
Process ID: 1
Cost: 1
QosLcId:
Interface: vlan200
BkInterface: vlan100
Neighbor : 0.0.0.0
Label: NULL
BKLabel: NULL
Age: 00h01m27s
Process ID: 1
Cost: 1
QosLcId:
Interface: vlan200
BkInterface: vlan101
Neighbor : 0.0.0.0
Label: NULL
BKLabel: NULL
Age: 00h01m27s
46
backup-interface vlan-interface 101