HP 3600 v2 series Configuration Manual page 179

0000.0000.0003.01-00* 0x00000002
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
LSPID
--------------------------------------------------------------------------
0000.0000.0003.00-00* 0x00000012
0000.0000.0004.00-00
0000.0000.0004.01-00
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
[SwitchD] display isis lsdb
LSPID
-------------------------------------------------------------------------------
0000.0000.0003.00-00
0000.0000.0004.00-00* 0x0000003c
0000.0000.0004.01-00* 0x00000002
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
# Display the IS-IS routing information of each switch. Level- 1 switches must have a default route with the
next hop being the Level- 1 -2 switch. The Level-2 switch must have both routing information of Level- 1 and
Level-2.
[SwitchA] display isis route
IPV4 Destination
--------------------------------------------------------------------------
10.1.1.0/24
10.1.2.0/24
192.168.0.0/24
0.0.0.0/0
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
[SwitchC] display isis route
0xabdb
Level-2 Link State Database
Seq Num Checksum
0xc93c
0x00000026 0x331
0x00000001 0xee95
Database information for ISIS(1)
--------------------------------
Level-2 Link State Database
Seq Num Checksum
0x00000013 0xc73d
0xd647
0xec96
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv4 Level-1 Forwarding Table
-------------------------------------
IntCost ExtCost ExitInterface
10 NULL
20 NULL
20 NULL
10 NULL
167
854 55
Holdtime Length
842 100
1173 84
668 55
Holdtime
1003
1194
1007
NextHop
Vlan100 Direct
Vlan100 10.1.1.1
Vlan100 10.1.1.1
Vlan100 10.1.1.1
0/0/0
ATT/P/OL
0/0/0
0/0/0
0/0/0
Length ATT/P/OL
100 0/0/0
84 0/0/0
55 0/0/0
Flags
D/L/-
R/-/-
R/-/-
R/-/-