HP 3600 v2 series Configuration Manual page 31

Destination/Mask
120.1.1.0/24
Static Routing table Status : <Inactive>
Summary Count : 1
Destination/Mask
120.1.1.0/24
# Enable BFD debugging on Switch A. When the link between Switch A and Switch D fails, Switch A can
detect the failure.
<SwitchA> debugging bfd event
<SwitchA> debugging bfd scm
<SwitchA> terminal debugging
%Oct 10 10:18:18:672 2010 SwitchA BFD/4/LOG:Sess[1.1.1.9/2.2.2.9, Loop1,Ctrl], Sta:
UP->DOWN, Diag: 1
* Oct 10 10:18:18:672
[Src:1.1.1.9,Dst:2.2.2.9, Loop1,Ctrl], instance:0, protocol:STATIC
# Display the static route information on Switch A again. Switch A communicates with Switch B over the
static route passing Switch C now.
<SwitchA> display ip routing-table protocol static
Public Routing Table : Static
Summary Count : 2
Static Routing table Status : < Active>
Summary Count : 1
Destination/Mask
120.1.1.0/24
Static Routing table Status : < Inactive>
Summary Count : 1
Destination/Mask
120.1.1.0/24
Proto Pre Cost
Static 60 0
Proto Pre Cost
Static 65 0
2010
Proto Pre Cost
Static 65 0
Proto Pre Cost
Static 60 0
19
NextHop
2.2.2.9
NextHop
10.1.1.100
SwitchA BFD/7/EVENT:Send
NextHop
10.1.1.100
NextHop
2.2.2.9
Interface
Vlan10
Interface
Vlan11
sess-down
Interface
Vlan11
Interface
Msg,