To do...
Enter system view
Enter IS-IS view
Bind the IS-IS process with MIBs
Configuring BFD for IS-IS
Follow these steps to enable BFD on an IS-IS interface:
To do...
Enter system view
Enter interface view
Enable IS-IS on the interface
Enable BFD on the IS-IS interface
Displaying and maintaining IS-IS
To do...
Display brief IS-IS configuration
information
Display the status of IS-IS debug
switches
Display the IS-IS Graceful Restart
state
Display information about IS-IS
enabled interfaces
Display IS-IS LSDB information
Use the command...
system-view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
isis mib-binding process-id
Use the command...
system-view
interface interface-type interface-number
isis enable [ process-id ]
isis bfd enable
Use the command...
display isis brief [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
display isis debug-switches { process-id |
vpn-instance vpn-instance-name } [ | { begin |
exclude | include } regular-expression ]
display isis graceful-restart status [ level-1 |
level-2 ] [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
display isis interface [ statistics | [ interface-type
interface-number ] [ verbose ] ] [ process-id |
vpn-instance vpn-instance-name ] [ | { begin |
exclude | include } regular-expression ]
display isis lsdb [ [ l1 | l2 | level-1 | level-2 ] |
[ lsp-id lspid | lsp-name lspname ] | local |
verbose ] * [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
163
Remarks
—
—
Required
By default, MIBs are bound with
IS-IS process 1.
Remarks
—
—
Required
Disabled by default
Required
Not enabled by default
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view