Troubleshooting routing policy configuration
IPv4 routing information filtering failure
Symptom
The routing protocol is running properly, but filtering routing information failed.
Analysis
At least one item of the IP prefix list must be configured as permit mode, and at least one node in the
routing policy must be configured as permit mode.
Solution
Use the display ip ip-prefix command to display IP prefix list information.
1.
Use the display route-policy command to display routing policy information.
2.
IPv6 routing information filtering failure
Symptom
The routing protocol is running properly, but filtering routing information failed.
Analysis
At least one item of the IPv6 prefix list must be configured as permit mode, and at least one node of the
routing policy must be configured as permit mode.
Solution
Use the display ip ipv6-prefix command to display IP prefix list information.
1.
Use the display route-policy command to display routing policy information.
2.
377