Configuring Ospfv3 Gr - HP 3600 v2 series Configuration Manual

# Display the routing table of Switch C.
[SwitchC] display ipv6 routing-table
Routing Table :
Destinations : 8
Destination: ::1/128
NextHop
Interface
Destination: 1::/64
NextHop
Interface
Destination: 2::/64
NextHop
Interface
Destination: 3::/64
NextHop
Interface
Destination: 3::2/128
NextHop
Interface
Destination: 4::/64
NextHop
Interface
Destination: 4::1/128
NextHop
Interface
Destination: FE80::/10
NextHop
Interface

Configuring OSPFv3 GR

Network requirements
As shown in
OSPFv3 routing domain are GR capable.
Switch A acts as the GR Restarter. Switch B and Switch C are the GR Helpers and synchronize their LSDBs
with Switch A through out-of-band (OOB) communication of GR.
: ::1
: InLoop0
: FE80::200:CFF:FE01:1C03
: Vlan300
: FE80::200:CFF:FE01:1C03
: Vlan300
: 3::2
: Vlan300
: ::1
: InLoop0
: 4::1
: Vlan400
: ::1
: InLoop0
: ::
: NULL0
Figure 1 10, Switch A, Switch B, and Switch C that belong to the same AS and the same
Routes : 8
305
Protocol : Direct
Preference: 0
Cost : 0
Protocol : OSPFv3
Preference: 150
Cost : 3
Protocol : OSPFv3
Preference: 150
Cost : 3
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0