Configuring Routing Between Mce And Pe - HP 3600 v2 series Configuration Manual

After you configure a BGP VPN instance, the BGP route exchange for the VPN instance is the same with
the normal BGP VPN route exchange. For more information about BGP, see Layer 3—IP Routing
Configuration Guide.
Configure a VPN site
2.
Follow these steps to configure a VPN site:
To do...
Enter system view
Enter BGP view
Configure the MCE as the eBGP
peer
Redistribute the IGP routes of the
VPN

Configuring routing between MCE and PE

MCE-PE routing configuration includes these tasks:
Bind the MCE-PE interfaces to VPN instances
•
Perform route configurations
•
• Redistribute VPN routes into the routing protocol running between the MCE and the PE.
Configuring static routing between MCE and PE
Follow these steps to configure static routing between MCE and PE:
To do...
Enter system view
Configure static
routes for a VPN
instance
Configure the
default precedence
for static routes
Configuring RIP between MCE and PE
Follow these steps to configure RIP between MCE and PE:
To do...
Enter system view
Use the command...
system-view
bgp as-number
peer { group-name | ip-address }
[ as-number as-number ]
import-route protocol [ process-id ]
[ med med-value | route-policy
route-policy-name ] *
Use the command...
system-view
ip route-static dest-address { mask | mask-length }
{ gateway-address | interface-type interface-number
[ gateway-address ] | vpn-instance d-vpn-instance-name
gateway-address } [ preference preference-value ] [ tag tag-value ]
[ description description-text ]
ip route-static vpn-instance s-vpn-instance-name&<1-6>
dest-address { mask | mask-length } { gateway-address [ public ] |
interface-type interface-number [ gateway-address ] |
vpn-instance d-vpn-instance-name gateway-address } [ preference
preference-value ] [ tag tag-value ] [ description description-text ]
ip route-static default-preference default-preference-value
Use the command...
system-view
405
Remarks
—
—
Required
Optional
A VPN site must advertise the VPN
network addresses it can reach to
the connected MCE.
Remarks
—
Required
Use either
command.
Optional
60 by default
Remarks
—