Configuring Routing Between Mce And Pe - HP 12500 Series Configuration Manual

NOTE:
After you configure a VPN site as an iBGP peer of the MCE, the MCE does not advertise the BGP routes
learned from the VPN site to other iBGP peers, including VPNv4 peers. Only when you configure the VPN
site as a client of the RR (the MCE), does the MCE advertise routes learned from it to other iBGP peers.
Configure a VPN site
2.
To configure a VPN site:
To do...
Enter system view
Enter BGP view
Configure the MCE as the iBGP
peer
Redistribute the IGP routes of the
VPN

Configuring routing between MCE and PE

MCE-PE routing configuration includes these tasks:
Bind the MCE-PE interfaces to VPN instances
•
Perform route configurations
•
Redistribute VPN routes into the routing protocol running between the MCE and the PE.
•
NOTE:
Configurations in this section are configured on the MCE. Configurations on the PE are similar to those on
the PE in common MPLS L3VPN network solutions (see
Configuring static routing between MCE and PE
To configure static routing between MCE and PE:
To do...
Enter system view
Configure static
routes for a VPN
instance
Configure the
default precedence
for static routes
Use the command...
system-view
bgp as-number
peer { group-name | ip-address }
[ as-number as-number ]
import-route protocol [ process-id ]
[ med med-value | route-policy
route-policy-name ] *
Use the command...
system-view
ip route-static dest-address { mask | mask-length }
{ gateway-address | interface-type interface-number
[ gateway-address ] | vpn-instance d-vpn-instance-name
gateway-address } [ preference preference-value ] [ tag tag-value ]
[ description description-text ]
ip route-static vpn-instance s-vpn-instance-name&<1-6>
dest-address { mask | mask-length } { gateway-address [ public ] |
interface-type interface-number [ gateway-address ] |
vpn-instance d-vpn-instance-name gateway-address } [ preference
preference-value ] [ tag tag-value ] [ description description-text ]
ip route-static default-preference default-preference-value
"Configuring routing between PE and
241
Remarks
—
—
Required
Optional
A VPN site must advertise the VPN
network addresses it can reach to
the connected MCE.
Remarks
—
Required
Use either
command.
Optional
60 by default
CE").