Configuring Routing Between An Mce And A Pe - HP FlexFabric 5700 Configuration Manual

Table of Contents

Advertisement

2.
Configure a VPN site:
Step
1.
Enter system view.
2.
Enter BGP view.
3.
Configure the MCE as an
IBGP peer.
4.
Enter BGP IPv4 unicast
address family view.
5.
Enable BGP to exchange
IPv4 unicast routes with the
peer.
6.
Redistribute the IGP routes
of the VPN into BGP.

Configuring routing between an MCE and a PE

MCE-PE routing configuration includes the following tasks:
Binding the MCE-PE interfaces to VPN instances.
Performing route configurations.
Redistributing VPN routes into the routing protocol running between the MCE and the PE.
Perform the following configurations on the MCE. Configure the PE in the same way that you
configure a PE in a basic MPLS L3VPN. For more information about configuring the PE, see
"Configuring MPLS L3VPN."
Configuring static routing between an MCE and a PE
Step
1.
Enter system view.
2.
Configure a static route
for a VPN instance.
3.
(Optional.) Configure
the default preference
for static routes.
Command
system-view
bgp as-number
peer { group-name | ip-address
[ mask-length ] } as-number
as-number
address-family ipv4 [ unicast ]
peer { group-name | ip-address
[ mask-length ] } enable
import-route protocol
[ { process-id | all-processes }
[ med med-value ] ]
Command
system-view
ip route-static vpn-instance
s-vpn-instance-name dest-address { mask-length
| mask } { interface-type interface-number
[ next-hop-address ] | next-hop-address [ public ]
[ track track-entry-number ] | vpn-instance
d-vpn-instance-name next-hop-address [ track
track-entry-number ] } [ permanent ] [ preference
preference-value ] [ tag tag-value ] [ description
description-text ]
ip route-static default-preference
default-preference-value
11
Remarks
N/A
N/A
N/A
N/A
By default, BGP does not
exchange IPv4 unicast routes
with any peer.
By default, no routes are
redistributed into BGP.
A VPN site must advertise VPN
network addresses to the
connected MCE.
Remarks
N/A
By default, no static
route is configured.
The default preference
is 60.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents