Creating A New Destination Profile - Cisco CSR 1000v Series Software Configuration Manual

Configuring Call Home for the Cisco CSR 1000v
In this version of the Call Home feature, you can change the destination of the CiscoTAC-1 profile.
• Message formatting—The message format used for sending the alert. The format options for a user-defined
• Message size—The maximum destination message size. The valid range is 50 to 3,145,728 bytes. The
• Reporting method—You can choose which data to report for a profile. You can enable reporting of
• Anonymous reporting—You can choose for your customer identity to remain anonymous, and no
• Subscribing to interesting alert-groups—You can choose to subscribe to alert-groups highlighting your
This section contains the following subsections:

Creating a New Destination Profile

To create and configure a new destination profile, perform the following steps:
SUMMARY STEPS
1. configure terminal
2. call-home
3. profile name
4. [no] destination transport-method {email | http}
5. destination address {email email-address | http url}
6. destination preferred-msg-format {long-text | short-text | xml}
7. destination message-size-limit bytes
8. active
9. reporting {all | smart-call-home-data| smart-licensing-data }
10. end
11. show call-home profile {name | all}
12. show call-home smart-licensing
13. show call-home smart-licensing statistics
destination profile are long-text, short-text, or XML. The default is XML. For the predefined CiscoTAC-1
profile, only XML is allowed.
default is 3,145,728 bytes.
Smart Call Home data or Smart Licensing Data, or both. Only one active profile is allowed to report
Smart Licensing data at a time.
identifying information is sent.
interests.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
Creating a New Destination Profile
237