Measurement Mode; Introduction - Promax HD RANGER+ Manual

3 MEASUREMENT MODE

3.1

Introduction

On the panel left side, the equipment has three functions keys, which give direct
access to the thr e most important functions. One of them is the key
MEASUREM ENT (
connector.
The user should connect a signal to the input and select the band, whether
terrestrial or satellite. Then the auto-identification function (also known as
StealthID) locks the signal and dem
detecting its characteristic parameters.
Having identified the signal, the equipment measures according to the signal
type. All information about transponders or multiplex is au
without introducing any additional parameter identification.
Next there is a list of signals that the equipment can automatically detect. For
more information ab
Signals description.
Digital Terrestrial Television First Generation (DVB-T)
Digital Terrestrial Television Second Generation (DVB
Digital Satellite Television First Generation (DVB-S)
Digital Satellite Television Second Generation (DVB-S2)
Digital Cable Television First Generation (DVB-C )
Digital Cable Television Second Generation (DVB-C2
Generic
Analogue terrestrial TV
Analogue Cable TV
Analogue Satellite TV
Analogue Terrestrial FM
∗
Only available for
HD
∗∗
StealthID function for DVB-C only available for
2
Special digital signal. The equipment does not demodulate it but measures its power and C/N ratio. It
can be used for special signals as DAB/DAB + or COFDM modulation with narrow BW.
3-30
e
) that measures the signal received through the RF input
out characteristics of each signal type refer to Annex 1:
2
+
RANGER
odulates it in real time, automatically
∗∗
*
HD +
RANGER
tomatically displayed
∗
-T2 )
)
April 2013