Remote Control Commands; Annex 4 - Promax HD RANGER+ Manual

ANNEX 4

Introduction
A4.1
The design of
exchanged between the equipment and a remote controller (usually a personal
computer) via USB. By this way, data can be obtained from the equipment and
also control it remotely. These data can be stored and subsequently processed
for use in maintenance work. Furthermore, the remote control allows tracking
and monitoring installations.
Protocol for communication between the
A4.2
This protocol is controlled by software and is using a virtual serial port over an
USB interface. Data and information are exchanged using messages consisting of
ASCII alphanumerical characters. This method ensures easy carrying between
different types of personal computers.
To activate the virtual serial port, a special driver must be installed. The driver is
included with the purchased instrument.
Connections
►
The cable between the
equipment.
You need at least Windows XP to work with
work for Windows operative systems. What drivers do is to create a virtual COM
port, so the software application can "see" the equipment.
April 2013

REMOTE CONTROL COMMANDS

HD +
RANGER/
HD
based on a microprocessor, allows data to be
and the PC is supplied with the
+
RANGER/
HD
HD +
RANGER/
. Drivers only
+
RANGER/
and a PC
33