If you want to run your system 12 hours from now and start on Table 1, type the
following in the Autostart field:
12
In
6. Activate Autostart by pressing the Lock Keyboard screen key. The countdown time
displays on the Pump Setup screen.
When the keyboard is locked, pressing the function keys will display the correct
screens, but no changes to the parameter values are allowed. Make sure you have
programmed all gradient and event tables before you lock the keyboard.
Canceling Autostart
To cancel a countdown in progress, unlock the keyboard by pressing the Unlock Keyboard
screen key.
Keyboard Lock/Unlock
Locking the keyboard:
•
Prevents accidental alteration of gradient flow conditions
•
Starts the Autostart condition
When the keyboard is locked, the screen key legend changes to Unlock Keyboard.
Unlock Keyboard:
•
Is the only operational key on the Pump Setup screen
•
Cancels the Autostart condition
8.2.3 Exiting the Pump Setup Screen
To exit the Pump Setup screen, perform one of the following actions:
•
Press any function key to select another mode
•
Press the Pump Config screen key to display the Pump Configuration screen.
164
Setting Gradient Controller Operating Parameters
0
Hrs
Min Start Run of Table 1