Gradient Controller Screens
Figure 8-1
illustrates the relationships of the screens associated with the Waters 600
Controller in its Gradient Controller configuration. Use
Gradient Controller operation.
Note: In Gradient Controller mode, function key labels do not correspond exactly to the
screens they access. For more information, see
8.1 Setting Up the 600 as a Gradient Controller
This section describes how to use the Pump Configuration screen to configure the Waters
600 Controller as a Gradient controller. It includes procedures for:
•
Configuring the controller type
•
Communicating with a data system
150
Setting Gradient Controller Operating Parameters
Figure 8-1 Gradient Controller Screens
Figure 8-1
to navigate through
Section 2.3.2, Function
Keys.