Programming The Detector Table - Waters 600e User Manual

3. When the table entries are complete, keep the Analysis Plan and File Sheet as a
permanent record of your table.
Detector table entries affect the two UV/Vis detectors (Waters 486 and 490E). There is a
separate sensitivity parameter for the Waters 410 RI detector and Waters 431/432
Conductivity detector. Sensitivity is not under time control for these detectors.
Sample Detector Table
Figure 6-10 illustrates a detector table.

6.3.2 Programming the Detector Table

Figure 6-11 illustrates the steps involved in using the Detector Table screen to create a
detector table. Use this flowchart for quick reference once you become familiar with your
Waters 600E system.
120 Creating PowerLine Methods
410 Sens 1024
Time Det/Chan
Initial 1
3.10 1
4.62 1
Figure 6-10 Detector Table Example
431/432 Sens 0.0005
Wavelength AUFS
254 0.1
240 0.005
245 0.01