2. Press the Insert Line screen key. This copies the line the cursor is presently on to the
new line and reorders the step numbers.
3. Edit the information on the new line as necessary.
Saving Tables
Whenever you change a table, you must save the changes before powering down the
system.
To save a table after you have entered all of the changes, press the Save screen key.
The system does not retain settings that you have not saved. When you turn on the system
later, the last-saved table is the default.
If you exit the Program Methods screen without pressing the Save screen key, the system
erases the information.
Clearing Tables
1. Press the More screen key.
2. Press the Clear Table screen key. The system erases the table displayed on the
screen.
3. To recall the last-saved table, press the Recall screen key.
Creating a Method Table 131