Waters 600e User Manual page 150

Accessing the Detector Tables Screen
1. Press the Program Table function key to display the Program Gradient screen (see
Figure
2. Press the Next Table screen key to display the Program Event screen (see
Figure
3. Press the Next Table screen key. The Detector Tables screen appears
In addition to the detector tables parameters, there are five active screen keys on the
Detector Tables screen. These screen keys have the functions described in
Table 6-4 Detector Table Screen Keys
Key
Next Table
Clear Line
Clear Table
122 Creating PowerLine Methods
6-5).
6-9).
Figure 6-12 Detector Tables Screen
Function
Cycles through the Program Gradient screen, Program
Event screen, and back to the Detector Tables screen.
Clears the line on which the cursor currently resides. The
line remains in permanent memory.
Clears the entire table currently displayed on the screen
and returns the initial conditions line to default status. The
table remains in permanent memory until you save a new
table.
(Figure 6-12).
Table 6-4.