Stern Bracket; Stern Bracket Removal; Stern Bracket Disassembly - Evinrude E-TEC E115DPLSCR Service Manual

STERN BRACKET

Stern Bracket Removal

Before servicing the stern bracket:
Remove gearcase. Refer to Gearcase GEAR-
•
CASE REMOVAL AND INSTALLATION on
p. 301.
Remove powerhead. Refer to Powerhead
•
POWERHEAD REMOVAL on p. 228.
Remove exhaust housing. Refer to Exhaust
•
Housing
Exhaust
p. 275.
Remove power trim/tilt unit. Refer to TRIM AND
•
TILT section.

Stern Bracket Disassembly

Remove and discard steering shaft locknut.
Remove the lower mount bracket and keeper.
on
Housing Removal
30738
30736
Remove the steering shaft and thrust washer. It
may be necessary to tap the steering shaft out
using a wood dowel and mallet.
Pry out upper and lower steering shaft seals and
discard. Remove the upper and lower steering
shaft bushings.
Remove the tilt tube. Refer to TILT TUBE on
p. 273.
Remove the two tilt tube washers.
MIDSECTION
STERN BRACKET
30735
30765 / 30764
12
30763
281