Powerhead Removal - Evinrude E-TEC E115DPLSCR Service Manual

POWERHEAD

POWERHEAD REMOVAL

POWERHEAD REMOVAL
WARNING
Protect against hazardous fuel spray.
Before starting any fuel system service,
carefully relieve fuel system pressure.
Refer to Relieving Fuel System Pressure
on p. 183.
To prevent accidental starting while ser-
vicing, disconnect the battery cables at
the battery.
Remove lower motor covers. Lower Cover
Removal on p. 91.
Remove flywheel cover and rear shroud.
Remove air temperature sensor from air silencer.
Remove the air silencer.
228
Disconnect power trim connectors.
1
1. Tilt limit switch connector
2. Sending unit connector
1. Tilt relay connector
Remove screw and washer from shift rod lever to
005248
release the lower shift rod.
1. Shift rod screw
005272
2
005254
1
005255
1
005253