EXHAUST HOUSING
Exhaust Housing Removal
Before removing the midsection:
The gearcase must be removed. Refer to Gear-
•
case GEARCASE REMOVAL AND INSTAL-
LATION on p. 301.
The powerhead must be removed. Refer to
•
POWERHEAD REMOVAL on p. 228.
Remove and discard four lower mount screws.
20" Models
"
25" Models
"
Remove the exhaust housing.
Remove lower mount covers and inspect the
lower mounts.
If replacement is necessary, lubricate mount with
soapy water and carefully pry at both ends to
remove.
23036
32590
MIDSECTION
EXHAUST HOUSING
005223
32578
275
12