Exhaust Housing Disassembly - Evinrude E-TEC E115DPLSCR Service Manual

MIDSECTION
EXHAUST HOUSING

Exhaust Housing Disassembly

Remove three screws and exhaust valve actuator
(V4 models).
1
1. Actuator screws
Remove the front and rear screws retaining the
adapter/inner exhaust housing to the exhaust
housing.
1
1. Adapter retaining screws
Lift the adapter/inner exhaust housing out of the
exhaust housing.
276
Remove the water tube. Inspect water tube grom-
met and replace if necessary.
1
1
1. Water tube grommet
005206
V4 M
ODELS
Remove circlip and washers from exhaust valve
shaft on starboard side of inner exhaust housing.
1
1
1. Circlip
005205
Remove exhaust valve shaft and washer from port
side of inner exhaust housing.
005207
Remove exhaust valves from inside the inner
exhaust housing.
005210
005211
005212