Selecting A Rotor; Entering Run Speed - Beckman Coulter Avanti J-HC Instructions For Use Manual

• If an invalid setting is entered, the display blinks and the valid range for that parameter is
displayed in the message line. A valid parameter must be entered and
before you can enter another parameter.

Selecting a Rotor

1
Press ROTOR.
The Rotor:
bucket,
2
Press the appropriate soft key to select the rotor type.
A list of rotors of the selected type appears.
Swinging bucket rotors are displayed below.
a. To select a different rotor type, press
3
Select the rotor name by pressing the appropriate soft key.
a. Press
The selected rotor name appears in the

Entering Run Speed

Enter a run speed up to the maximum speed of the rotor in use (10,000 RPM maximum). Or, enter a
relative centrifugal field (RCF) value up to the maximum achievable RCF of the rotor.
PN J3HC-IM-5AD
field flashes, and rotor type abbreviation soft keys (
JLA:
lightweight fixed angle) appear.
Rotor : - -
Speed : 0 RPM = 0 x G
Time : 00:00
Temp : 25°C Max Temp : 29°C
Accel : MAX Decel : MAX
ENTER.
JA: fixed angle,
5.0
3.4A
4.2
ROTOR
again and then press another soft key.
Rotor: field.
Operation
Manual Operation
ENTER
must be pressed
JS: swinging
2-5
2