Set Speed Page - Beckman Coulter Optima XE Series User Manual

Set Speed Page

Figure 5.7 Set Speed Page (No Rotor Selected)
Figure 5.8 Set Speed Page (Rotor Selected)
The
Set Speed
Footer Bar, allowing you to set the speed for the next run. As an alternate, if you have already
selected a rotor, you can set the units in RCF (Relative Centrifugal Field) instead of RPM.
If the instrument is in
In addition to the Header Bar and the Footer Bar, the
elements:
• The Set Speed Display at the top of the page shows the current Set Speed in RPM or RCF. The
last two digits are always zeroes when the speed is above 1000 RPM.
• The Keypad changes the speed setting. You can use the Clear and Backspace keys to make
corrections.
PN B07711AA
Page appears when you select the
ω
²t mode, the
Set Speed Time
Display/Button on the
Set Speed
Page appears instead.
Page contains the following
Set Speed
Functional Pages 5

Set Speed Page

Page or the
Home
5-5