Protocols And Standards; Configuring Wlan Service; Configuration Task List; Configuring Global Wlan Parameters - HP a-msr Configuration Manual

Protocols and standards

ANSI/IEEE Std 802.1 1, 1999 Edition

IEEE Std 802.1 1a

IEEE Std 802.1 1b

IEEE Std 802.1 1g

IEEE Std 802.1 1i

IEEE Std 802.1 1-2004

IEEE Std 802.1 1n


Configuring WLAN service

Configuration task list

Task

Configuring global WLAN parameters

Specifying a country code

Configuring a WLAN service template
Configuring radio parameters
Configuring the radio of the AP
Configuring 802.11n
Configuring global WLAN parameters
To configure global WLAN parameters:
To do...
1. Enter system view.
2. Configure the client idle
timeout interval.
3. Configure the client keep alive
interval.
4. Enable the fat AP to respond
to the probe requests with the
SSID null sent by the client.
Specifying a country code
A country code identifies the country in which you want to operate radios. It determines characteristics such
as operating power level and total number of channels available for the transmission of frames. You must set
the valid country code or area code before configuring an AP.
Use the command...
system-view
wlan client idle-timeout interval
wlan client keep-alive interval
wlan broadcast–probe reply
14
Description
Optional
Required
Required
Required
Required
Optional
Remarks
—
Optional.
By default, the idle timeout interval
is 3600 seconds.
Optional.
By default, keep–alive function is
disabled.
Optional.
Enabled by default.