Installing The Primary Drive Gear - Yamaha YZ85W1 Service Manual

KICK STARTER AND SHIFT SHAFT
5-34

INSTALLING THE PRIMARY DRIVE GEAR

1. Install:
• straight key
2. Install:
• primary drive gear
• washer
• primary drive gear nut
NOTE: NOTE:
Install the conical washer to the crankshaft
as shown in the illustration.
3. Tighten:
• primary drive gear nut
Drive gear holder
90890-01495, YM-01495
NOTE: NOTE:
Hold the drive gear holder
case using the M6 bolts
4. Install:
• primary driven gear
Refer to "CLUTCH".
5. Install:
• dowel pin
• gasket (right crankcase cover)
6. Install:
• right crankcase cover
NOTE: NOTE:
Mesh the impeller shaft gear
drive gear .
ENG
79 Nm (7.9 m•kg, 57 ft•lb)
onto the crank-
.
with primary