Control Panel; Selecting Panoramic Exposure Program - Planmeca ProOne User Manual

8

CONTROL PANEL

Cross = Cancel
8.1

Selecting panoramic exposure program

Program
field
User's Manual
Check mark = Accept
NOTE The patient positioning lights will be automatically
NOTE The contents of the displays depend on the unit
NOTE Never allow patients to touch the display when they
To make a selection on the control panel, simply touch the
display with your finger on a text field or on an icon. For
example, to select the program type touch the program
field with your finger. You will hear a signal tone when a
field is activated.
Only the text fields and icons on the display are touch-
sensitive, and touching areas outside them will not
activate an action.
To accept a selection, touch the green check button in the
bottom right corner of the display. To cancel a selection,
touch the red cross button in the bottom left corner of the
display.
The display will automatically switch to stand-by mode if
you do not touch it for more than 30 minutes. A blue
power light on the left side of the display indicates that the
unit is switched on even though the display is dark. The
display will switch on as soon as you touch it again.
switched on when the display is touched.
configuration. The displays shown here are from a unit
that features all currently available imaging programs.
are positioned in the unit.
To select a panoramic exposure program touch the
program field on the main display. The main display is the
display that is shown when the X-ray unit is switched on.
CONTROL PANEL
Planmeca ProOne 11