First Time Installation And Configuration; Hardware Installation And Setup - Polycom 3150-16966-002 User Manual

First Time Installation and
Configuration
Follow the procedure below to implement First Time Installation and
Configuration of the RMX 1000 system:
1
2
3

Hardware Installation and Setup

Install the hardware and connect lines as described below:
1
2
Hardware Installation and Setup
Configuration Preparations
― Get the information needed for network configuration.
― Get the product activation key.
First Time Configuration
― Connect a PC to the RMX 1000
― Log in to the Web interface
― Modify the default IP address
― Configure other network options
― Synchronize the system time
Put the RMX 1000 product on a stable surface at the installation site.
Carefully take the RMX 1000 device out of the package. You can install
the device in the rack or position it on an even surface.
― Mount the RMX 1000 in the rack: Install rack brackets, supplied by
the rack manufacturer, in the rack. Mount the RMX 1000 on top of
the rack brackets. Fasten the RMX 1000 to the rack with screws.
2
2-1