Command Introduction - Polycom 3150-16966-002 User Manual

Chapter 18 – Appendix B: Telnet/Terminal Commands
If you entered a wrong password, you may be required to re-login to the
system.
If you entered the right password, you will be brought directly to the
command setting interface.

Command Introduction

Help
After logging into the system, you may enter ? or help after the prompt "#" to
show the command prompt information.
Exit
Enter exit after the prompt # to exit the command control
interface.
18-2
"<>" indicates an optional parameter
•
"{}" indicates a required parameter
•
"|" indicates a 1-out-of-N parameter
•