Sip Server - Polycom 3150-16966-002 User Manual

Table 11-3
Parameter
IP Network Type
Register to Gatekeeper
Primary (Alternate)
Gatekeeper
Gatekeeper IP Address
Gatekeeper Port
System Prefix/E164.
System H.323 Alias

SIP Server

If your network supports Session Initiation Protocol (SIP), you can connect
an IP call with SIP.
In the IP Network Services interface, click SIP Server to configure SIP server
parameters.
Gatekeeper Setting
Description
Set the IP network type for the RMX 1000 system to make
a call. You need to set it based on the call type used for the
participant's endpoint. It can be set to:
H.323: Only H.323 calls are supported.
SIP: Only SIP calls are supported.
H.323 & SIP: H.323 calls and SIP calls are supported at
the same time.
Settings of the gatekeeper related parameters are
available only when the H.323-supporting network type is
selected.
Set whether or not to register with the gatekeeper. You must
check this option to set the parameters that follow.
Indicates whether or not the device is registered with the
primary (or alternate) gatekeeper.
Set the IP address for the primary (or alternate)
gatekeeper.
The port number for the primary (or alternate) gatekeeper.
Set the E.164 number for the system.
Set the H.323 alias for the system.
Polycom RMX 1000 User Guide
11-5