Polycom 3150-16966-002 User Manual page 50

Figure 4-6 Recording Parameter Setup Interface
The table below explains the configuration parameters.
Table 4-12 Conference Recording Configuration
Parameter Description
If an RSS 2000 is available on your network, you can select
Enable Recording
this option to enable the recording function.
Select the start time of the conference recording:
Start
If this option is selected, the endpoint screen displays the
recording indicator icon to inform participants that the
Enable Recording
conference is being recorded:
Indication
Note: Recording indication is not supported in video switching
conference and HD 720p conference.
If this option is selected, the system will terminate the
Terminate
conference when the recording fails or there is no endpoint in
conference if
the lobby.
recording fail ...
If this option is selected, only the audio will be recorded.
Audio Only
The recording parameters can be set here only after the IP address of the RSS
•
2000 is configured on the Recording Link interface. For how to set Recording Link,
see Recording Setup.
The Recording Link occupies one conference resource.
•
If the encryption function is enabled in the Conference Profiles->General
•
interface, recording will succeed only when the RSS 2000 also supports
encryption.
Immediately – The recording automatically starts
immediately after the first participant joins the conference.
Upon Request – The operator or chairperson starts the
recording manually. After this option is selected, the
recording can be manually started through the Web interface
or DTMF function. For more information, see Recording
Control.
Polycom RMX 1000 User Guide
4-11