Advanced Setting - Polycom 3150-16966-002 User Manual

Figure 8-4 Cascading Configuration – RMX 1000_2

Advanced Setting

Usually, you only need to set the parameters on the General tab, and accept
other default settings of the system. To set advanced parameters, click the
Advanced tab.
Figure 8-5 New Participants - Advanced
The table below explains the configuration parameters.
Table 8-2 Configuration Description of New Participants
Parameter Description
Specify the line rate of the participant's endpoint. Auto
indicates using the line rate specified by the RMX 1000
Line rate
system.
Move the corresponding slider to adjust the volume
transmitted/received by the participant. Each grid increases or
Broadcast / Listen
decreases the sound by 3dB. The adjustable range is 1~10 (in
Volume
the ascending order), while the default value is 5dB.
Set the Email address used by the participant to receive
conference notices from the system. Up to 2 Email addresses
E-Mail
can be set by separating them with a ";". For example, enter
address1@polycom.com; address2@polycom.com.
Polycom RMX 1000 User Guide
–
Advanced
8-5