Snmp Setting; Setting The Agent - Polycom 3150-16966-002 User Manual

Chapter 14 – RMX Utilities

SNMP Setting

RMX1000 supports the Simple Network Management Protocol (SNMP). You
can monitor the MCU status by managing the workstation.
Click the Setup ->SNMP Setting menu item at the upper left part to enter the
SNMP Properties interface.
Figure 14-8

Setting the Agent

Configure the following parameters on the SNMP Properties -> Agent
interface:
Table 14-5
Parameter
SNMP Enabled
Retrieve MIB Files
Contact person for
this MCU
MCU Location
MCU System
Name
SNMP Agent
Version
14-8
SNMP Setting Page - Agent
Parameter Configuration of SNMP Agent
Description
With this option selected, the administrator is allowed to
manage the RMX 1000 system with SNMP from a far end.
Only after the SNMP function is enabled, can you configure
the following parameters.
You can export MIB files by clicking this button.
Specifies the name of the person who manages this MCU
from a far end
Specifies the location of MCU
Specifies the system name of MCU
Specifies the SNMP agent version used by MCU
Version 1 and Version 2 - When this option is selected, you
need to configure Community Name.
Version 3 - Specifies the parameter settings of secure and
remote configuration; when this option is selected, you need
to configure User Name, Security Level and related
options.