Site Name; Advanced Options - Polycom 3150-16966-002 User Manual

Site Name

A user can set the site name (endpoint name), so as to label each site when
viewed onscreen. The site name displayed for each connected participant
comes from the system name configured within the endpoint.
Click the Site Name tab on the New Profile interface to set the site name
parameters.
Figure 4-8
Here, you can specify the displayed font size and position for the site name.
If Always show site name is selected, the name of each site will be always
displayed during the conference.

Advanced Options

A user can set advanced options in the conference profile to fine-tune video
and audio quality.
To set advanced options, click Advanced Options in the New Profile interface.
Figure 4-9
The table below describes the related parameters.
Site Name Setting Interface
Advanced Options Setting Interface
Polycom RMX 1000 User Guide
4-13