Qos - Polycom 3150-16966-002 User Manual

Parameter
Server Port
Server Domain Name
User Name
Password
Outbound Proxy
Server

QoS

Quality of Service (QoS) is very important in transmission of high-bandwidth
audio and video data. You can use QoS to test and guarantee the following
parameters:
•
•
•
In the IP Network Services interface, click QoS to configure the QoS
information.
Figure 11-6
The table below explains the meanings for all QoS parameters.
Table 11-5
Parameter
Enable
Description
Provides the connection port of SIP server for registration
service.
Provides the domain name of SIP server for registration
service.
User name provided by the SIP server for the registered
user.
Password matched with the user name.
For communication with the SIP server when the RMX
1000 system is configured on the internal network, an
outbound proxy server is required to implement traversal
of the firewall/NAT. In this case, you need to set the IP
address and port number for the outbound proxy server.
Average packet delay
Delay variation (jitter)
Error rate
IP Network Services - QoS
QoS Parameter Settings
Description
Select this option to enable configuration of the QoS
settings. When un-checked, the system uses the default
QoS settings.
Polycom RMX 1000 User Guide
11-7