Product Activation - Polycom 3150-16966-002 User Manual

Chapter 14 – RMX Utilities
Configure the following parameters:
Table 14-6
Parameter
SNMP Trap
Version
Trap Destinations
Community Name
User Name
Engine ID
Security Level
Authentication
Protocol
Authentication
Password
Privacy Protocol
Privacy Password
Trap Setting

Product Activation

The Product Activation page is used in the following three activation cases:
•
•
•
Click Setup -> Product Activation in the menu bar on the top of the Web
page. The Product Activation page opens, which lists the serial number, current
version number, and other device information.
14-10
Parameter Configuration of SNMP Traps
Description
Specifies the SNMP Trap version used by MCU
Version 1 and Version 2 - When this option is selected, you
need to configure Trap Destinations and Community Name.
Version 3 - Specifies the parameter settings of secure and
remote configuration; when this option is selected, you need to
configure User Name, Security Level and related options.
Specifies sending destinations of SNMP Traps
Specifies the name of community to which the MCU and SNMP
management workstation belongs. The agent to authenticate
the SNMP management workstation uses community Name.
Set the name of user remotely accessed by SNMP.
Specifies the engine ID of SNMP
Specifies whether to enable the authentication mechanism and
encryption mechanism
Specifies the authentication algorithm. MD5 and SHA are
available.
You can set a password for the authentication protocol to
enhance security.
Specifies the encryption algorithm. DES and AES are
available.
Enter the password of encryption algorithm.
Specifies whether the agent sends Traps packets to the
management workstation in the following cases:
System alerts
Connection
The conference starts/ends.
A new participant enters the lobby.
Activate the newly purchased RMX 1000 device.
Activate payment function items of the RMX 1000, such as H.264, 720p
conference, and conference reservation.
Activate the upgraded device.