Polycom 3150-16966-002 User Manual page 84

•
Auto: This option is selected by default. Each multi-screen window will
automatically select to display a conference site based on the
information about connected participants.
•
Auto Scan: After this option is selected, if the set multi-screen number is
smaller than the number of connected participants, the window will
display images of the rest participants in turn, and the time interval for
switching between the conference sites is the value of Auto Scan
Interval.
•
Directly select an endpoint conference site to be displayed at the
window.
In the Same Layout mode, participants will view the video of their conference sites.
Setting the Conference Message Overlay
When a message needs to be sent to all participants in a conference, you can
set the message overlay to be displayed on all participants' endpoints screen.
To set a message overlay:
In the Conferences list pane, double-click the desired conference.
1
On the conference parameter interface, click the Message Overlay tab,
2
and set the required parameters.
Table 9-2 Setting Message Overlay
Parameter Description
Select this option to enable message overlay. Then you can
Enable
set other parameters.
Enter the content to be displayed.
Message Text
Set the font size of the message overlay.
Font Size
Set the color-matching scheme for the message overlay font
Color
and background.
Move the slider to set the display times of the message
Display
overlay.
Repetitions
Move the slider to set the display speed of the message
Display Speed
overlay.
Move the slider to set the vertical boarder of the message
Vertical Border
overlay.
Move the slider to set the contrast of the message overlay.
Contrast
Setting the Site Name
The site name is also the endpoint name, which marks each site on the
viewed screen. The site name displayed at each participant's endpoint comes
from the system name set for the endpoint.
Polycom RMX 1000 User Guide
9-5