Synchronizing System Time - Polycom 3150-16966-002 User Manual

Chapter 2 – First Time Installation and Configuration
Parameter
Server Address
Server Port
Server Domain Name
User Name
Password
Outbound Proxy
Server
8
For more network service configuration information, see IP Service Settings.

Synchronizing System Time

Before holding a conference using the RMX 1000 system, you need to first
synchronize the system time to ensure that the conference scheduling time is
consistent with your local time.
1
Figure 2-11
2-10
Description
Provides the IP address of SIP server for registration
service.
Provides the connection port of SIP server for registration
service.
Provides the domain name of SIP server for registration
service.
User name provided by the SIP server for the registered
user.
Password corresponds with the user name.
For communication with the SIP server when the RMX
1000 system is configured on the internal network, an
outbound proxy server is required to implement traversal
of the firewall/NAT. In this case, you need to set the IP
address and port number for the outbound proxy server.
Click the OK button to complete the configuration.
In the Web configuration interface, click Setup -> RMX Time to go to the
system time configuration interface.
RMX Time