Control Operations - Polycom 3150-16966-002 User Manual

Button
In the participant list, right-click any connected participant to display the
shortcut menu. Through this shortcut menu, you can conduct common
participant control operations. If you right click an unconnected but defined
participant, the shortcut menu only provides some of the above operations.

Control Operations

Setting Conference Layout for Participant's Endpoint
If the layout mode is set to Conference Layout on the conference parameter
interface, you can customize the layout of each participant's endpoint at the
Web interface.
To define the screen layout of each participant:
1
2
3
Name Description
Suspend the video transmission from the participant to
the conference. The suppressed participant's video is
not transmitted to the conference but the participant still
Suspend Video
receives conference video. The Suspend Video
indicator appears in the participant list and the Resume
Video button becomes active (
Participant's video transmission to the conference
resumes. The Suspend Video button becomes active
Resume Video
(
To block the audio transmission from the conference to
the participant. When blocked, the participant can still
be heard by the conference. The Audio Blocked
Block Audio
indicator appears in the Participants List and the
Unblock Audio button becomes active (
Conference audio transmission to the participant
resumes. The Block Audio button becomes active
Unblock Audio
(
Open the address book, and then select the desired
Add Participant
participants. For more information about the address
to Address
book, see Address Book.
Book
Start conference recording.
Start Recording
Pause
Stop conference recording temporarily.
Recording
Terminate conference recording.
Stop Recording
In the participant list, double-click the participant to be defined, or
right-click this participant, and then click Participant Properties to enter
the participant parameter interface.
Click the Video Settings tab, and then select Personal from Layout Type.
Set layout for the endpoint. The procedure for setting layout here for the
endpoint is similar to that for setting conference layout. For more
information, see Changing Conference layout.
Polycom RMX 1000 User Guide
).
).
).
).
9-9