Setting Traps - Polycom 3150-16966-002 User Manual

Parameter
Community Name
User Name
Security Level
Authentication
Protocol
Authentication
Password
Privacy Protocol
Privacy Password

Setting Traps

On the SNMP Properties interface, click the Traps tab to display the Traps
page.
Figure 14-9
Description
Specifies the name of community to which the MCU and
SNMP management workstation belongs. The agent to
authenticate the SNMP management workstation uses
community Name.
Set the name of user remotely accessed by SNMP.
Specifies whether to enable the authentication mechanism
and encryption mechanism
Specifies the authentication algorithm. MD5 and SHA are
available.
You can set a password for the authentication protocol to
enhance security.
Specifies the encryption algorithm. DES and AES are
available.
You can set a password for the encryption protocol to enhance
security.
SNMP Setting Page - Traps
Polycom RMX 1000 User Guide
14-9