First Time Configuration; Connecting Pc To Rmx 1000 - Polycom RMX 1000 Getting Started Manual

First Time Configuration

Connecting PC to RMX 1000

1 Connect your PC to the LAN1 port (the LAN1 port is enabled by
default) of the RMX 1000 with a cross-over network cable, or con-
nect your PC and RMX 1000 to the same switch in the LAN. Turn
on the power switch at the RMX 1000.
2 Configure the IP address for your PC, which is in the same network
segment as the IP address of the RMX 1000.
The default IP address of the RMX 1000 before delivery is:
IP address of the LAN1 port - 192.168.1.254
–
Subnet mask - 255.255.255.0
–
Default gateway IP address - 192.168.1.1
–
You can also view the current address information of the product
using the RMX 1000 Discover tool provided with the device.
a. Run the RMX 1000Discover.exe file in the CD provided with
the product.
b. Click the Discover button to display the current address
information of the device.
5