Download Print this page

HP 6125XLG Configuration Manual: Configuring The Mapping Between The N_port Wwn And The Fc Address; Configuring The Fabric Timers

R2306-hp 6125xlg blade switch fcoe configuration guide.
Hide thumbs

Advertisement

switch if the preferred type is configured. The non-principal switch will isolate the upstream link and
refuse other domain IDs assigned by the principal switch if the static type is configured.
HP recommends that you configure domain IDs of the same type for all switches in a VSAN.
To configure a domain ID for a switch:
Step
1.
Enter system view.
2.
Enter VSAN view.
3.
Configure a domain ID for
the switch.
Configuring the mapping between the N_Port
WWN and the FC address
If you bind the WWN of an N_Port to an FC address, when the N_Port requests an FC address, the
switch assigns the bound FC address to it.
The WWN of an N_Port can be bound to only one FC address, and vice versa.
The N-Port here indicates an N_Port on a node or an NP_Port on an NPV switch.
To bind the WWN of an N_Port to an FC address:
Step
1.
Enter system view.
2.
Enter VSAN view.
3.
Bind the WWN of an
N_Port to an FC address.

Configuring the fabric timers

The fabric operation involves the following timers:
Distributed service timeout period
Error detection timeout period
Resource allocation timeout period
For more information about these timers, see FC-related protocols and standards.
You can configure fabric timers by using one of the following ways:
Configure the timers in system view, and the configuration takes effect for all VSANs.
Command
system-view
vsan vsan-id
domain-id domain-id { preferred |
static }
Command
system-view
vsan vsan-id
wwn wwn-value area-port-id
area-port-id-value
27
Remarks
N/A
N/A
By default, the domain ID of a switch is
0 and is of the preferred type.
Remarks
N/A
N/A
By default, no binding is
configured.
If the N_Port has been assigned
another FC address or the FC
address has been assigned to
another N_Port, the binding is
not allowed.

Advertisement

   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: