Display The Content Of All Acls On The Switch - HP ProCurve 5300xl Series Management Manual

Note

Display the Content of All ACLs on the Switch

This command lists the configuration details for every ACL configured in the
running-config file, regardless of whether you have assigned any to filter traffic
on VLANs configured on the switch.
Syntax: show access-list config
List the configured syntax for all ACLs currently configured
on the switch.
Notice that you can use the output from this command for input to an offline
text file in which you can edit, add, or delete ACL commands. Refer to "Editing
ACLs and Creating an ACL Offline" on page 9-53.
This information also appears in the show running display. If you executed write
memory after configuring an ACL, it appears in the show config display.
For example, with two ACLs configured in the switch, you will see results
similar to the following:
Figure 9-18. Example of an ACL Configured Syntax Listing
Access Control Lists (ACLs) for the Series 5300xl Switches
Displaying ACL Data
9-49