How To Display Domain Ids; How To Set The Domain Id - HP AA979A - StorageWorks SAN Switch 2/8V Administrator's Manual

How to display domain IDs

1. Connect to a switch and log in as admin.
2. Enter the fabricShow command.
Fabric information is displayed, including the domain ID (D_ID):
switch:admin> fabricshow
Switch ID
-------------------------------------------------------------------------
1: fffc01 10:00:00:60:69:e4:00:3c
2: fffc02 10:00:00:60:69:e0:01:46
3: fffc03 10:00:00:60:69:e0:01:47
5: fffc05 10:00:00:05:1e:34:01:bd
6: fffc06 10:00:00:05:1e:34:02:3e
7: fffc07 10:00:00:60:69:34:02:0c
10: fffc0a 10:00:00:60:69:80:04:46
11: fffc0b 10:00:00:60:69:80:04:47
15: fffc0f 10:00:00:60:69:80:47:74
16: fffc10 10:00:00:60:69:80:47:75
19: fffc13 10:00:00:05:1e:34:00:ad
20: fffc14 10:00:00:05:1e:34:00:63
30: fffc1e 10:00:00:60:69:90:02:21
31: fffc1f 10:00:00:60:69:90:02:60
32: fffc20 10:00:00:60:69:90:02:68
33: fffc21 10:00:00:60:69:90:03:20
34: fffc22 10:00:00:60:69:90:03:01
40: fffc28 10:00:00:60:69:50:06:7f
45: fffc2d 10:00:00:05:1e:34:c5:17
50: fffc32 10:00:00:60:69:c0:06:64
51: fffc33 10:00:00:60:69:c0:1e:43
60: fffc3c 10:00:00:60:69:12:34:44
62: fffc3e 10:00:00:60:69:12:32:76
63: fffc3f 10:00:00:60:69:12:45:6e
64: fffc40 10:00:00:60:69:12:1d:51
The Fabric has 25 switches
switch:admin>
The fields in the fabricShow display are:
Switch ID—The switch Domain_ID and embedded port D_ID.
Worldwide NameT—The switch WWN.
Enter IP Addr—The switch Ethernet IP address.
FC IP Addr—The switch FC IP address.
Name—The switch symbolic name. An arrow (>) indicates the principal switch.

How to set the domain ID

1. Connect to the switch and log in as admin.
2. Enter the switchDisable command to disable the switch.
3. Enter the configure command.
Enter y after the Fabric Parameters prompt:
4.
Fabric parameters (yes, y, no, n): [no] y
5. Enter a unique domain ID at the Domain prompt. Use a domain ID value from 1 through 239 for
normal operating mode (FCSW compatible):
Domain: (1..239) [1] 3
Respond to the remaining prompts (or press Ctrl-d to accept the other settings and exit).
6.
7. Enter the switchEnable command to re-enable the switch.
38 Performing basic configuration tasks
Worldwide Name Enet IP Addr FC IP Addr
10.32.220.80 0.0.0.0
10.32.220.1 0.0.0.0
10.32.220.2 0.0.0.0
10.32.220.5 0.0.0.0
10.32.220.6 0.0.0.0
10.32.220.7 0.0.0.0
10.32.220.10 10.32.219.0
10.32.220.11 10.32.219.1
10.32.220.15 0.0.0.0
10.32.220.16 0.0.0.0
10.32.220.19 0.0.0.0
10.32.220.20 0.0.0.0
10.32.220.30 0.0.0.0
10.32.220.31 0.0.0.0
10.32.220.32 0.0.0.0
10.32.220.33 0.0.0.0
10.32.220.34 0.0.0.0
10.32.220.40 0.0.0.0
10.32.220.45 0.0.0.0
10.32.220.50 0.0.0.0
10.32.220.51 0.0.0.0
10.32.220.60 0.0.0.0
10.32.220.62 0.0.0.0
10.32.220.63 0.0.0.0
10.32.220.64 0.0.0.0
Name
"ras080"
"ras001"
"ras002"
"ras005"
"ras006"
"ras007"
"ras010"
"ras011"
"ras015"
"ras016"
"ras019"
>"ras020"
"ras030"
"ras031"
"ras032"
"ras033"
"ras034"
"ras040"
"ras045"
"ras050"
"ras051"
"ras060"
"ras062"
"ras063"
"ras064"