Npv Commands; Display Npv Login - HP 6125XLG Command Reference Manual

zoneset name
•

NPV commands

display npv login

Use display npv login to display the nodes on downlink interfaces and their mapped uplink interfaces.
Syntax
display npv login [ vsan vsan-id ] [ interface interface-type interface-number ]
display npv login [ vsan vsan-id ] count
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If no VSAN is specified, this
command displays the nodes of all VSANs on an NPV switch.
interface interface-type interface-number: Specifies a downlink interface by its type and number. If no
downlink interface is specified, this command displays the nodes on all downlink interfaces on an NPV
switch.
count: Displays the number of logged-in nodes on an NPV switch.
Usage guidelines
This command is available only when the switch is operating in NPV mode.
Examples
# Display the nodes on downlink interfaces and their mapped uplink interfaces on an NPV switch.
<Sysname> display npv login
Server
Interface VSAN FCID
Vfc1
# Display the number of logged-in nodes on the NPV switch.
<Sysname> display npv login vsan 1 count
Total entries: 2
Table 25 Command output
Field
Server Interface
External interface
FCID
Port WWN
Port WWN
1 0xae0003 10:00:00:00:c9:66:6b:60 20:00:00:00:c9:66:6b:60 Vfc2
Description
Name of the downlink interface.
Name of the uplink interface mapped by the downlink interface.
FC address of the node.
Port WWN of the node connected to the NPV switch.
Node WWN
80
External
Interface