2.9.1
Pairing a Bluetooth Headset
Note: Headset pairing information is also available in the Getting Started Centre in the
Today screen on your EP10.
Before pairing a headset or any other Bluetooth device with your EP10, make certain that
the Bluetooth device power is enabled; it is enabled by default. If, for some reason, it has
been disabled:
Tap on Start>Settings>System tab and then, tap on the Power icon to display the
•
Power dialog box.
Tap on the Built-in Devices tab, and tap in the checkbox next to Enable Bluetooth.
•
•
Next, tap on Start>Settings>Connections tab>Bluetooth icon.
•
Tap on the Mode tab, and check Turn on Bluetooth. Tap OK.
•
Turn your headset on and place it within a few feet of your EP10.
•
If needed, set your headset to visible so that the EP10 can detect it and establish a
connection.
Most headsets are in pairing mode by default. If this is not the case, follow the headset man-
ufacturer's instructions to place the headset in pairing mode.
•
Tap on Start>Settings>Connections tab>Bluetooth icon.
•
In the Devices tab, tap Add new device. Wait for the EP10 to scan for devices.
Choose the headset device from the list and tap on Next.
•
If the headset has authentication enabled, the EP10 then prompts you to provide a passcode.
•
Type the passcode (or PIN – Personal Identification Number), and then tap on Next.
The EP10 then displays a list of services. Choose the Hands Free service. (If you are at-
tempting to pair another device, choose it from this list.)
With Hands Free checked (enabled), tap Finish. The headset is now paired.
•
2.10
Inserting the microSD and SIM Card
There are two card holders available in the battery compartment of the EP10 – the lower
holder is provided for a microSD (micro Secure Digital) and the upper holder is for a SIM
(Subscriber Identity Module) card.
The microSD cards provide additional non-volatile memory to your EP10. SIM cards
provide access to the voice option, the Internet, and so on.
Preliminary Draft
EP10 Hand-Held (Windows Embedded 6.5) User Manual
Chapter 2: Getting to Know the EP10
Pairing a Bluetooth Headset
25