Composite - Psion 7515 User Manual

Appendix C: Bar Codes Settings

Composite

Length Restriction
Refer to "Length Restriction" on page C-8 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-9 for details.
C.2.18 Composite
Important: To successfully read this type of bar code, the two types of
A composite symbol includes multi-row 2D components making it compatible with linear
and area CCD scanners along with linear and rastering laser scanners.
The options available for this parameter represent multi-level components of a composite
symbol.
Enable CC-C And Enable CC-AB
To activate these components, set these parameters to on.
Enable TLC-39
This composite component integrates MicroPDF417 with the linear code. Setting this pa-
rameter to on enables this parameter.
C.2.19 PDF-417
Enable
Setting this parameter to on enables PDF-417 two dimensional (2D) coding.
Length Restriction
Refer to "Length Restriction" on page C-8 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-9 for details.
C-18 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Preliminary Draft
symbologies included in a composite bar code must be enabled.
In addition, "Center Bar Code Only" must be disabled.